51 32 170 Removing And Installing / Replacing Door Window Glass, Front Left Or Right
Necessary preliminary tasks:
- Open door window to 140 mm.
- REMOVE FUNCTION CARRIER IN FRONT DOOR
- Remove OUTER WINDOW CAVITY COVER STRIP
Door window glass must be opened to dimension (A).
A = approx. 140 mm
Unfasten screws (1).
Installation:
Tightening torque: 51 32 2AZ . See FRONT DOOR WINDOWS for specs.
Rubber (2) is only fitted at rear.
Turn door window glass and lift out towards rear/top.
Installation:
Bores (1) of door window glass (5) must not be damaged.
If necessary, install new screws (2), washers (3) and plastic washers (4).