51 14 110 Removing And Installing/Replacing Rear Model Designation (Up To 03/2005)

IMPORTANT:

The "INSTRUCTIONS FOR NUMBER/LETTER COMBINATION CEMENTING " serve as the basis for these repair instructions and must be followed without fail.

Fitting dimensions (E65, E66, E67):

Fig 1: Identifying Fitting Dimensions (Up To 03/2005)

Courtesy of BMW OF NORTH AMERICA, INC.

Attach adhesive tape (1) to rear lid above rear fog light (2) up to top edge "A". Mark measurement "B" from outermost corner point of rear fog light (2) on adhesive tape (1).

Dimensions:

A = 16 mm

B = 35 mm

NOTE:

Measurements C, D, E and F are for information purposes only, as determined by carrier film.

C = 8 mm, D = 10 mm, E = 16 mm, F = 26 mm