51 14 000 Removing And Installing/Replacing Front BMW Badge

Special tools required: 

• 00 9 318

To avoid damaging the paintwork on the engine hood/bonnet, tape off edge areas (1) to sides of guide pins.

So as not to subject the BMW badge to excessive deformation, lever out badge with special tool 00 9 318  at guide pins (2).

Fig 1: Identifying Special Tool 00 9 318

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Following parts of badge (1) must not be damaged or missing:

2 Guide pins

3 Grommets

Fig 2: Identifying Badge, Grommets And Guide Pins

Courtesy of BMW OF NORTH AMERICA, INC.