37 12 Control And Suspension Systems, Rear
TIGHTENING TORQUE SPECIFICATION - CONTROL AND SUSPENSION SYSTEMS, REAR
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Pressure line connections | E38 / E39 | M10 | 14 Nm | |
| 2AZ | Pressure line connections | E38 / E39 | M12 | 20 Nm | |
| 3AZ | Screw connection for air line | E39 / E53 / E61 / E65 / E66 | Dia. = 4 mm | 2 Nm | |
| E53 | Dia. = 6 mm | 4 Nm | |||
| 4AZ | Lever on stabilizer: | E38 | tighten one nut to 5 Nm, then second nut to 9 Nm, then first nut to 9 Nm. | 9 Nm | |
| 5AZ | Air suspension on wheel carrier | E39 | 20 Nm | ||
| 6AZ | Air spring strut to wheel carrier | E65 / E66 | M14 | Replace screw | 165 Nm |
| 7AZ | Pressure sensor to pressure accumulator | E53 | 9 Nm | ||