22 11 001 Replacing Right Engine Mount (N62/N62TU)

Necessary preliminary tasks: 

• Secure ENGINE in installation position
• Release both engine mounts from above
• Remove front underbody protection
• Remove FRONT WHEELS
• Lower FRONT AXLE SUPPORT
• Remove REINFORCEMENT PLATE
• Observe SAFETY INSTRUCTIONS on raising the vehicle

Release screw connection for engine mount at bottom right.

Remove engine mount towards front.

Fig 1: Locating Engine Mount Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Lug (1) of engine mount must point to middle of vehicle.

Engine mount designations:

1. Right engine mount: Even component number
2. Left engine mount: Odd component number
   Fig 2: Locating Lug Of Engine Mount

   Courtesy of BMW OF NORTH AMERICA, INC.