33 55 040 Replacing Stabilizer Link For Rear Left Or Right Stabilizer

IMPORTANT: Observe safety when raising the vehicle.

Release nut; if necessary, grip brace at Torx socket.

Installation:

Replace self-locking nut.

Tightening torque 33 55 2AZ . See REAR AXLE - TIGHTENING TORQUES .

Fig 1: Locating Self-Locking Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut; if necessary, grip brace at Torx socket.

Remove stabilizer link.

Installation:

Replace self-locking nut.

Tightening torque 33 55 2AZ . See REAR AXLE - TIGHTENING TORQUES .

Fig 2: Locating Stabilizer Link

Courtesy of BMW OF NORTH AMERICA, INC.