31 35 005 Removing And Installing/Replacing Push Rod (Stabilizer Link) For Left/Right Stabilizer
IMPORTANT:
Observe safety when raising the vehicle.
NOTE:
Stabilizer links may only be replaced in pairs.
Release nut; if necessary, grip brace at Torx socket.
Installation:
Replace self-locking nut.
Tightening torque 31 35 12AZ . See FRONT AXLE - TIGHTENING TORQUES .
Release nut; if necessary, grip brace at Torx socket.
Remove stabilizer link.
Installation:
Replace self-locking nut.
Tightening torque 31 35 12AZ . See FRONT AXLE - TIGHTENING TORQUES .