72 60 057 Removing And Installing/Replacing Ski Bag

Fold center armrest downwards.

Unlock cover lid (1) by pulling on handle (2) and fold downwards.

Fig 1: Identifying Cover Lid With Pulling On Handle

Courtesy of BMW OF NORTH AMERICA, INC.

Release locks on trim (1) with a screwdriver (2).

Remove trim (1).

Fig 2: Identifying Locks On Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and (2).

Installation:

Insert screw (2) in nut on retaining strap for ski bag.

Fig 3: Identifying Retaining Strap For Ski Bag And Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Remove ski bag cassette (1) in direction of arrow from rear partition.

Fig 4: Removing Ski Bag Cassette From Rear Partition

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, perform this work step with assistance of a second person.

Ski bag cassette (3):

Fig 5: Identifying Ski Bag Cassette And Locking Lugs

Courtesy of BMW OF NORTH AMERICA, INC.