61 67 083 Removing And Installing/Replacing Left Or Right High-Pressure Nozzle Of Headlight Washer System (From 03/2005)

Special tools required: 

• 13 3 010 

Necessary preliminary tasks: 

• Remove front bumper trim  . See 51 11 156 REMOVING AND INSTALLING FRONT BUMPER TRIM .

To prevent excess escape of washer fluid, seal off end of high - pressure line with special tool 13 3 010. 

Unlock high-pressure line (2) and detach from high-pressure nozzle (1).

Release screws (3).

Remove high-pressure nozzle (1).

Installation: 

New spray nozzles are already preset.

Check function.