61 67 083 Removing And Installing/Replacing Left Or Right High-Pressure Nozzle Of Headlight Cleaning System

Special tools required:

To prevent excess escape of washer fluid, seal off end of high - pressure line with special tool 13 3 010.

Fig 1: Identifying Special Tool (13 3 010)

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock H.P. line (3) and detach from H.P. nozzle (1).

Release screws (2).

Remove H.P. nozzle (1).

Fig 2: Identifying H.P. Line And H.P. Nozzle

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Slide guide (2) into opening (1).

New spray nozzles are already preset.

Carry out function check.

Fig 3: Identifying Guide Into Opening

Courtesy of BMW OF NORTH AMERICA, INC.