65 77 541 Removing and Installing/Replacing Front Left Or Right Acceleration Sensor

Necessary preliminary tasks: 

• Remove front bumper trim  . See 51 11 156 REMOVING AND INSTALLING FRONT BUMPER TRIM

Disconnect plug connection (1).

Release screws (2) and remove acceleration sensor (3).

Installation: 

Tightening torque 65 77 9AZ  . See 65 77 AIRBAG TRIGGERING CONTROL

Replace screws (2).

Fig 1: Identifying Plug Connection, Screws & Sensor

Courtesy of BMW OF NORTH AMERICA, INC.