51 45 263 Removing And Installing/Replacing Instrument Panel Trim On Right

Necessary preliminary tasks:

REMOVE wood trim on instrument panel on right.

Disconnect Bowden cable (1) for glovebox.

Fig 1: Identifying Bowden Cable

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE:

In the version equipped with a CD changer, the CD changer is secured with screws (2).

Release screws (1) and (2).

Version with CD changer:

Pull out CD changer (4) and trim (3) together slightly.

Fig 2: Identifying CD Changer And Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Release lock (1) and detach holder (2) from CD changer (3) on left and right.

Remove trim (4).

Fig 3: Detaching Holder From CD Changer

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

When installing CD changer (3), make sure radio retaining pin (2) is correctly inserted in fixture (1).

Fig 4: Identifying CD Changer, Radio Retaining Pin And Fixture

Courtesy of BMW OF NORTH AMERICA, INC.

Version without CD changer:

Release lock (1) on left/right and remove trim (2).

Fig 5: Identifying Lock And Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Both versions:

Installation:

Make sure holder (2) is correctly seated in panel (1).

Replacement only:

Remove button for glovebox.

Fig 6: Identifying Holder And Panel

Courtesy of BMW OF NORTH AMERICA, INC.