41 61 000 Hood Lid Removal And Installation
Necessary preliminary tasks:
- Remove and install both gas-filled struts for engine hood . See 51 23 265 REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT GAS STRUT FOR ENGINE BONNET/HOOD .
The following illustration serves as a general guide and is to be applied to the relevant vehicle type.
Release screw (1).
Loosen screw (2).
Remove hood lid.
Installation:
Install engine hood at screw locations on hinge. This dispenses with the need for adjustment after installation.
If this is not possible, adjust engine hood . See 41 61 014 ADJUSTING HOOD LID .