66 54 001 Adjusting Night Vision Camera
NOTE:
Mechanical adjustment - as described in the following - is only possible axially.
Vertical adjustment can only be carried out with the BMW diagnosis system:
- Service functions
- -> Body
- -> Night vision
- -> Night vision camera
- -> Vertical adjustment
Necessary preliminary tasks:
- Remove grille in bumper trim on left. See 51 11 185 REMOVING AND INSTALLING/REPLACING SIDE TRIM GRILLE FOR BUMPER TRIM (FROM 03/2005)
NOTE:
Front of car must be parallel at distance (A) to headlight aiming device (1).
A = 1.5 m
Align a suitable straight object (2), e.g. a spirit level, horizontally on headlight aiming device.
Carry out axial adjustment of night vision camera at adjusting screw (3).
NOTE:
The Fig 2 shows the in-car monitor view.
If necessary, align the picture of the night vision camera with aid of a second person.
Top edge (A) must be aligned parallel to top edge of screen (B).