17 11 035 Removing And Installing/Replacing Fan Cowl With Electric Fan (N62, N62TU)

Necessary preliminary tasks:

Unlock plug (1) on AUC sensor and disconnect.

Unlock connector (2) and remove.

NOTE:

Modify AUC sensor when replacing fan cowl.

Fig 1: Identifying AUC Sensor Plug And Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Raise fan cowl (1) approx. 3 cm.

Fig 2: Identifying Fan Cowl

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE:

For purposes of clarity, this work step is shown on the fan cowl after it has been removed.

Fold in left retaining tab (1) in direction of arrow.

Fig 3: Identifying Retaining Tab And Fan Cowl

Courtesy of BMW OF NORTH AMERICA, INC.

Remove fan cowl (1) in direction of arrow.

Fig 4: Identifying Fan Cowl

Courtesy of BMW OF NORTH AMERICA, INC.

Clear DME fault memory.