32 10 005 Adjustment for active front steering
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2008 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Adjustment of the active front steering must be carried out:
- after adjustment work on the front axle/steering
- after all mechanical work on the steering system
- after the battery has been disconnected or electrical plug connections on the steering column switch cluster have been disconnected
- after replacement/programming or coding of the following components:
- Steering column switch cluster
- DSC control unit
- Active front steering control unit
- ARS control unit
Connect vehicle to BMW diagnosis system.
Select and carry out initial operation/adjustment for active front steering under Service functions.