Service Information: Reset

The RAD2 can only be reset by the following procedures:

• Switch system ON/OFF
• Disconnect from vehicle electrical system
• BMW diagnosis system

There is no button or key combination on the device for performing a reset.

The 'Professional' navigation system (CCC) can be reset by simultaneously pressing and holding the eject buttons on the DVD and CD player and the rotary push-button for approximately 10 s. The CID becomes blank. The CCC is then restarted.

3 The MOST gateway ('Professional' radio, M-ASK or CCC) is muted for 2 s when resetting a MOST control unit. 1