12 42 Starter Line
STARTER LINE TIGHTENING SPECIFICATION
| - | Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|---|
| 1AZ | Assembly, starter motor/alternator cable to alternator | N54 | M8 | - | 19 Nm |
| 2AZ | Starter motor/alternator cable to starter motor | N54 | M8 | - | 13 Nm |
| 3AZ | Starter motor/alternator cable to jump-start connection point | N54 | M8 | Flange nut | 19 Nm |
| - | N54 | M8 x 14 | Hexagon screw 8.8 ZNS3 | 19 Nm | |
| - | N54 | M8 | Hexagon screw with ISA | 15 Nm | |
| 4AZ | Ground cable to engine support arm/engine carrier | N54 | M8 | - | 19 Nm |
| 5AZ | Ground cable to longitudinal member | N54 | M8 | - | 19 Nm |
| 6AZ | Ground rail to longitudinal member | N54 | M8 | - | 19 Nm |
| 7AZ | Bracket to crankcase | N54 | M8 x 16 | - | 19 Nm |