61 31 221 Removing and installing/replacing both multifunction steering wheel switches
Necessary preliminary tasks:
- Disconnect Battery Negative Lead
- Remove Airbag Unit
NOTE:
Both multifunction steering wheel switches (1) are connected to each other by the wiring harness.
Disconnect plug connection (2).
Pull multifunction steering wheel switches (1) in direction of arrow out of steering wheel.
Feed wiring harness out of steering wheel and remove both multifunction steering wheel switches.
Installation:
Make sure electrical leads are correctly routed.
Installation:
Guides (2) of multifunction steering wheel switches (1) must be correctly seated in corresponding locators (3) on steering wheel.