61 13 050 Removing and installing/replacing interior fuse box
Necessary preliminary tasks:
- Remove Flap In Luggage Compartment Panel on right
- Remove battery cover
- Disconnect Negative Battery cable
- Remove right Glovebox with housing
- Remove Junction Box
Release screws (1).
Disconnect plug connector (2).
Open cap (3) and release nut underneath.
For tightening torque refer to 61 13 1AZ. in 61 13 FUSE BOX
Remove battery positive lead from fuse box.
Installation:
Make sure positive battery cable is correctly seated on fuse box.
Detach plug connectors (1) from back of fuse box (2).
NOTE:
Write down colors and positions of plug connectors before removing.
Replacement:
Remove fuses and relays.