61 14 010 Removing and installing/replacing distribution box (on battery)

WARNING: Observe Safety Instructions for handling vehicle battery.

Necessary preliminary tasks:

Release screws (1) and remove bracket (2).

Fig 1: Identifying Screws And Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Fold up covers (3).

Unscrew nuts (2).

For tightening torque refer to 61 21 2AZ in 61 21 BATTERY WITH TERMINAL .

Fold up covers (5).

Unscrew nuts (4).

For tightening torque refer to 61 21 2AZ in 61 21 BATTERY WITH TERMINAL .

Fig 2: Identifying Plug Connection, Covers And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Using a screwdriver, expand locking bracket (1) at lower end and clip out.

Remove distribution box (2) towards top.

Fig 3: Identifying Distribution Box, Bracket And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.