LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2007 >> 335i 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (General Electrical System - Repair - E90/91) >> 35 ECUs, Modules >> 61 35 080 Removing and installing (replacing) control unit for left or right seat adjustment (front seat)

61 35 080 Removing and installing (replacing) control unit for left or right seat adjustment (front seat)

WARNING: This page is about a different variant/trim than selected.
IMPORTANT: Read and comply with Notes On Protection Against Electrostatic Damage (ESD Protection) .
NOTE: To facilitate installation/removal of control unit, move seat upwards fully.

Unlock metal lug (1) towards front and remove control unit for seat adjustment (2) towards bottom.

Unlock and disconnect all associated plug connections.

Fig 1: Removing Control Unit For Seat Adjustment
G04727635Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Make sure control unit for seat adjustment (1) is correctly seated in mounting (2).

Guides (3) and metal lug (4) must not be damaged.

Fig 2: Identifying Seat Adjustment, Seated In Mounting, Guide And Metal Lug
G04727636Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out Programming/Coding. 

scientia non olet · About LEMON Manuals