61 31 996 Carry out steering angle sensor adjustment
WARNING: This page is about a different variant/trim than selected.
IMPORTANT:
In vehicles with active front steering, steering angle sensor adjustment is integrated in the service function "Initial Operation/Adjustment For Active Front Steering
" and must not be carried out separately!
NOTE:
Steering angle sensor adjustment must be carried out:
- after adjustment work on the front axle/steering
- after all mechanical work on the steering system
- after replacement / coding / programming of the following components:
- Fixture for switches of steering column / switch cluster / steering angle sensor
- Dynamic Stability Control (DSC) control unit
- Active anti-roll stabilization (ARS)
Connect vehicle to BMW diagnosis system.
Select and carry out steering angle sensor adjustment under Service functions.