61 31 204 Replacing switch combination for seat adjustment

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Unlock retaining tabs (3) in direction of arrow and remove switch combination (1) from cover.

Disconnect plug connection (2).

Installation:

Retaining tabs (3) of cover and guide (4) of switch combination (1) must not be damaged.

Make sure switch combination (1) is correctly seated in retaining tabs (3).

Fig 1: Identifying Front Seat Retaining Tabs, Switch Combination And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.