61 31 133 Removing and installing/replacing AV connection socket

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Grip behind trim (1) from below and release catch (2) (risk of damage).

NOTE: Version with rear air conditioning is shown.

Fig 1: Identifying Trim And Trim Catch

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1 and 3) and guides (2) must not be damaged.

Fig 2: Identifying Trim Catches And Guides

Courtesy of BMW OF NORTH AMERICA, INC.

Lever AV connection socket (1) with a suitable tool (2) upwards out of storage compartment (3).

Fig 3: Identifying AV Connection Socket, Tool And Storage Compartment

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Remove AV connection socket (2) upwards out of storage compartment (3).

Installation:

Locks (4) must not be damaged.

Make AV connection socket (1) is correctly seated in storage compartment (3).

Fig 4: Identifying Plug Connection, Locks, Storage Compartment And AV Connection Socket

Courtesy of BMW OF NORTH AMERICA, INC.