61 31 115 Replacing rocker switch for side window operation (switch cluster, front)

WARNING: This page is about a different variant/trim than selected.

Special tools required:

IMPORTANT: Carry out the following work step carefully in order to avoid damaging door trim panel and rocker switch.

Carefully lever out rocker switch for side window operation (1) with special tool 00 9 340 at specified points (2).

Remove rocker switch for side window operation (1) from door trim panel (3) slightly.

Disconnect associated plug connection and remove rocker switch for side window operation (1).

Fig 1: Identifying Special Tool (00 9 340), Rocker Switch Clips Points And Door Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining clips (1) of rocker switch for side window operation (2) must not be damaged or missing.

Make sure rocker switch for side window operation (2) is correctly seated.

Fig 2: Identifying Side Window Rocker Switch And Retaining Clips

Courtesy of BMW OF NORTH AMERICA, INC.