61 31 068 Removing and installing/replacing switch for passenger airbag deactivation
WARNING: This page is about a different variant/trim than selected.
WARNING:
Read and comply with Safety Regulations
for handling airbag modules and pyrotechnical belt tensioners.
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
- Disconnect Battery Negative Lead
- Remove Side Cover On Right From Instrument Panel
Unlock catches (1) and remove switch for front passenger airbag deactivation (2) towards front side of cover.
Installation:
Make sure switch for front passenger airbag deactivation (2) is installed in correct position.