61 13 ... Relay carrier

WARNING: This page is about a different variant/trim than selected.

Place special tool 61 1 153 on relay carrier (1) and carefully pull in direction of arrow until retaining lugs (2) on relay carrier are raised.

Fig 1: Identifying Relay Carrier And Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.

Pull relay carrier (2) in direction of arrow into first catch (3).

Fig 2: Identifying Relay Carrier And Catch

Courtesy of BMW OF NORTH AMERICA, INC.

Press down arrester hook (4) of appropriate contact and pull out cable with contact.

Press out double flat spring contact with special tool 61 1 136 or 61 1 137 (ejector).

Fig 3: Identifying Relay Carrier Arrester Hook

Courtesy of BMW OF NORTH AMERICA, INC.