62 11 280 Removing and installing (replacing) instrument cluster

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION ).

NOTE: Extend steering wheel completely and lower.

Release screws (1).

Fold back instrument cluster (2) in direction of arrow and pull back slightly.

Unlock associated plug connection and disconnect.

If necessary, feed out/unclip associated wiring harness.

Remove instrument cluster (2).

Fig 1: Removing Instrument Cluster And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out programming/coding.

Check values for CONDITION BASED SERVICE (CBS) , replace if necessary.