63 99 295 Replacing bulb for auxiliary turn signal light, front left or right

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Unlock retaining lug (1).

Turn bulb holder (2) in direction of arrow and remove from auxiliary turn signal light (3).

Pull bulb out of holder (2).

Installation:

Retaining lug (1) must not be damaged.
Make sure bulb holder is correctly seated and engaged in auxiliary direction indicator
Note Bulb Type .

Fig 1: Identifying Retaining Lug, Bulb Holder And Auxiliary Turn Signal Light

Courtesy of BMW OF NORTH AMERICA, INC.