64 53 515 Replacing desiccant insert for A/C system

Necessary preliminary tasks: 

• Remove Condenser 
• Drawing off, evacuating and filling the A/C System  are not included in the time value given for this work operation

If necessary, pierce sticker over sealing cap (1).

Remove cap (1) from condenser (2).

Installation: 

For tightening torque refer to 64 53 12AZ in 64 53 REFRIGERANT LINES AND EXPANSION VALVE .

Fig 1: Identifying Sealing Cap And Condenser

Courtesy of BMW OF NORTH AMERICA, INC.

Remove Seeger circlip ring (1) with suitable pliers.

Fig 2: Identifying Seeger Circlip Ring

Courtesy of BMW OF NORTH AMERICA, INC.

With assistance of a screwed-in screw (1), withdraw desiccant insert (2) from condenser (3).

Fig 3: Identifying Desiccant Insert, Condenser And Screwed-In Screw

Courtesy of BMW OF NORTH AMERICA, INC.

After installation: 

• Fill and vent Cooling System and check for leaks