64 11 905 Removing and installing/replacing ventilation temperature sensor

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

NOTE: For purposes of clarity, the following graphics show the heater/air conditioner removed.

Pull temperature sensor (1) out of retaining lug (2).

Installation:

Make sure rubber ring is correctly seated.

Fig 1: Identifying Ventilation Temperature Sensor And Retaining Lug

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1) and remove temperature sensor (2).

Fig 2: Identifying Temperature Sensor And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.