65 82 050 Removing and installing (replacing) on-board monitor

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Proceed with care so as to avoid damaging the on-board monitor and adjoining trims.

Release screws (1).

Fold out on-board monitor (2) in direction of arrow.

Fig 1: Identifying On-Board Monitor And Retaining Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (1) and disconnect.

Installation:

Ensure correct cable routing.

Remove on-board monitor (2).

Fig 2: Identifying On-Board Monitor Plug Connections And On-Board Monitor

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out programming/coding.