65 13 188 Removing and installing/replacing rear mid-range speaker (in rear shelf)

WARNING: This page is about a different variant/trim than selected.

Special tools required:

Lever speaker cover (1) with special tool 00 9 341 out of rear shelf (2).

Fig 1: Identifying Special Tool (00 9 340), Speaker Cover And Rear Shelf

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Lugs (1) and locks (2) of speaker cover (3) must not be damaged.

Fig 2: Identifying Lugs, Locks And Speaker Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove mid-range speaker (2) upwards from rear shelf (3).

Disconnect associated plug connections and remove mid-range speaker (2).

Fig 3: Identifying Mounting Screws, Mid-Range Speaker And Rear Shelf

Courtesy of BMW OF NORTH AMERICA, INC.