65 12 220 Removing and installing/replacing satellite radio (US version only)

WARNING: This page is about a different variant/trim than selected.

NOTE: Follow instructions for Handling Optical Fibres .

Necessary preliminary tasks:

Disconnect plug connection (1).

Release screws (2) and feed out satellite tuner (3).

Installation:

Unlock plug connections correctly.
Bracket (4) must be inserted in guides on floor pan.

Fig 1: Identifying Satellite Tuner, Plug Connection, Mounting Bracket And Screws
Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Release screws (1) and remove bracket (2) from satellite tuner (3).

Fig 2: Identifying Satellite Tuner, Mounting Bracket And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Follow instructions for Handling Optical Fibres .

Necessary preliminary tasks:

Disconnect plug connection (1).

Release screws (2) and feed out satellite tuner (3).

Installation:

Fig 1: Identifying Satellite Tuner, Mounting Bracket, Screws And Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Release screws (1) and remove bracket (2) from satellite tuner (3).

Fig 2: Identifying Satellite Tuner, Screws And Mounting Bracket

Courtesy of BMW OF NORTH AMERICA, INC.