33 4 460 Set of tools
WARNING: This page is about a different variant/trim than selected.
Minimum set: Mechanical tools
In conjunction with: 33 4 450
Note: For removing and installing camber arm rubber mount on rear axle carrier.
Series: E60, E61, E63, E64, E65, E66, E67, E70, E81, E85, E86, E87, E90, E91, E92, E93, RR1, RR2
Storage location: B49, C49
SI number: 1 15 04 (117)
Order number: 33 4 460
Set of tools
Consisting of:
1 = 33 4 461 Draw-in disk
2 = 33 4 462 Pull-out disk
3 = 33 4 463 Counter support
4 = 33 4 464 Support sleeve
5 = 33 4 465 Spindle 205 mm, M12
6 = 33 4 466 Pressure nut