00 2 300 Assembly stand with universal flange

WARNING: This page is about a different variant/trim than selected.

Note: For accommodating engines from S85

Engine: M10, M20, M20B25, M20B27, M21, M30, M30B34, M30Tur, M40, M41, M42, M43, M43TU, M44, M47, M47T2, M47TU, M50, M51, M52, M52TU, M54, M56, M57, M57D25, M57D30, M57T2, M57TU, M60, M62, M62VAN, M67, M67TU, M70, M73, M88, N40, N42, N45, N46, N51, N52, N53, N54, N62, N62TU, N73, S14, S38, S50B30, S50B32, S50US, S52US, S54, S62, S85, W10, W11, W17

SI number: 01 25 04 (155)

Order number: 00 2 300

Assembly stand with universal flange

Consisting of:

1 = 00 2 301 Assembly stand

2 = 00 2 302 Universal flange

3 = 00 2 303 Crank

4 = 00 2 304 Protection hood

5 = 00 2 305 Storage for small parts

6 = 00 2 306 Molded tray, rear

7 = 00 2 307 Oil drip tray

8 = 00 2 308 Molded tray, front

Fig 1: Identifying Assembly Stand With Universal Flange (00 2 300) Components And Assembly

Courtesy of BMW OF NORTH AMERICA, INC.

9 = 00 2 309 Wheel, front (without stop)

10 = 00 2 311 Wheel, rear (with stop)

11 = 00 2 312 Set of rippled mats