33 41 Wheel Bearings
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS - WHEEL BEARINGS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Drive flange hub to output shaft | E81 / E82 / E87 / E88 / E90 / Except S65 / E91 / E92 / E93 / S65, | M27 | Replacing collar nut, lightly oil contact face | 420 Nm |
| E84 / E90 / E92 / E93 / S65 | M27 | Replace collar nut, lightly oil contact surface | 300 Nm | |
| E81 / E82 / E87 / E88 / E90 / E91 / E92 / E93 / S65 | M24 | Replace collar nut, lightly oil contact face | ||
| Jointing torque | 145 Nm | |||
| Angle of rotation | 90 ° | |||
| 2AZ Wheel bearing to wheel carrier | E84 | M10 | Replace bolts | |
| Jointing torque | 30 Nm | |||
| Angle of rotation | 110 ° | |||