21 21 Clutch Disc and Drive Plate
WARNING: This page is about a different variant/trim than selected.
CLUTCH DISC AND DRIVE PLATE TIGHTENING SPECIFICATION
| Type | Thread | Work instruction | Measure | |
|---|---|---|---|---|
| 1AZ Clutch to flywheel | E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 | M8 8.8 | Replace screws | 25 Nm |
| E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 | M8 10.9 | Replace screws | 34 Nm | |
| Clutch to flywheel With ZNS bolts | Replace ZNS bolts Jointing torque and angle of rotation must be observed without fail | |||
| E60 S85 | Jointing torque | 15 Nm | ||
| Torque angle | 25° | |||
| E60 N52 M47T2, E61 N52 /M47T2, E63 N52, E64 N52, E65 N52, E83 N52 /M47T2, E85 N52, E86 N52, E90 N52 /M47T2, E91 N52 /M47T2, E92 N54, E81 N47 | M8 10.9 | Jointing torque | 15 Nm | |
| Torque angle | 90° ± 5° |