34 00 Testing and bleeding brakes
WARNING: This page is about a different variant/trim than selected.
BRAKES TECHNICAL DATA - TESTING AND BLEEDING BRAKES
| Leak test with engine stopped: if applicable discharge vacuum reservoir by operating brake pedal firmly about 10 times | ||
| Approx. force on pedal | approx. N | 500 |
| equals approx. line pressure | approx. bar | 34 |
| Max. pressure drop within 2 min. | Percentage | 8 |
| Brake booster function test (with engine running) | 70 -100 | |
| Approx. force on pedal | approx. N | 200 |