11 22 513 Replacing roller bearing for dualmass flywheel (Manually)

WARNING: This page is about a different variant/trim than selected.

Special tools required:

NOTE: Flywheel removed!

Position special tool 11 2 010 in roller bearing.

Twist out roller bearing with special tool 11 2 343.

Fig 1: Identifying Position of Special Tools (11 2 010) And (11 2 343) To Twist Out Roller Bearing From Dual-Mass Flywheel

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble special tools 11 2 350 and 00 5 500.

Drive in roller bearing with special tools 11 2 350 and 00 5 500 in direction of arrow as far as it will go.

Fig 2: Positioning Special Tools (11 2 350) And (00 5 500) To Drive Roller Bearing Into Dual-Mass Flywheel

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.