33 00... Rear axle: wheel/chassis alignment check must be carried out after the following work

Fig 1: Identifying Rear Axle Components

Courtesy of BMW OF NORTH AMERICA, INC.

A Wheel/Chassis Alignment Check must be carried out after the following work:

• Release of following screw/bolt connections: 
  • Camber arm to rear axle carrier / wheel carrier
  • Trailing arm to rear axle carrier / wheel carrier
  • Guide arm to rear axle carrier
  • Toe arm to rear axle carrier / wheel carrier
  • Control arm to rear axle carrier
• Replacement of following parts: 
  1. Rear axle carrier
  2. Camber arm / rubber mount / ball joint
  3. Trailing arm / rubber mount
  4. Guide arm
  5. Wheel carrier / rubber mount / ball joint
  6. Toe arm
  7. Control arm