34 21 171 Removing and installing / replacing a brake carrier / brake guard at rear

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Release screws (1).

Installation:

For tightening torque refer to 34 21 3AZ in 34 21 REAR BRAKE .

Release screws (2) and remove brake carrier (3).

Installation:

For tightening torque refer to 34 21 3AZ in 34 21 REAR BRAKE .

Fig 1: Identifying Mounting Screws And Brake Carrier

Courtesy of BMW OF NORTH AMERICA, INC.