34 00 010 Checking thickness of brake pad

WARNING: This page is about a different variant/trim than selected.

Special tools required:

NOTE: The thickness of the outer brake pads can be determined without removing the wheels.

If necessary, move car until opening for brake pad wear indicator (brake pad) can be seen through rim styling.

Insert special tool 34 1 260 through rim into opening for brake pad wear indicator.

Press special tool onto brake pad. Slide ring (1) in direction of arrow up to stop and read off measured value.

NOTE:

Fig 1: Identifying Special Tool (34 1 260)

Courtesy of BMW OF NORTH AMERICA, INC.