Removing wheel electronics

WARNING: This page is about a different variant/trim than selected.

Release Torx socket crew (1) and remove wheel electronics (2).

Fig 1: Identifying Torx Socket Crew And Wheel Electronics

Courtesy of BMW OF NORTH AMERICA, INC.

Release union nut with special tool 00 2 190; if necessary, grip valve insert (1) at cylindrical section of ball head.

Remove valve insert from rim.

Fig 2: Using Special Tool (00 2 190 ) To Release Union Nut At Valve Insert

Courtesy of BMW OF NORTH AMERICA, INC.

Remove washer (1).

Fig 3: Identifying Wheel Valve Washer

Courtesy of BMW OF NORTH AMERICA, INC.