36 11 500 Initialising Run Flat Indicator (RPA)
WARNING: This page is about a different variant/trim than selected.
NOTE:
Checking the tyre pressure is based on monitoring the speeds of the wheels in relation to each other. A tyre puncture is detected and signalled by way of a deviation in specific speed ratios.
The four tyres mounted on the vehicle are monitored while the vehicle is moving.
Initialization must be carried out in each case immediately after tyre pressures have been corrected, after tyres/wheels have been replaced and after repairs to the air spring system.
IMPORTANT:
The Run Flat Indicator does not function when the vehicle is driven with the compact spare wheel.