41 31 010 Outer Roof Skin Replacement (Version With Slide/Tilt Sunroof)

Read contents of Body, General. 

Use only approved Spot-Welding Apparatus  for repairs!

Remove or cover those vehicle components in the repair area which are susceptible to heat or dust.

Following new body parts are required:

• (1) Roof outer skin, slide/tilt sunroof
  Fig 1: Identifying Slide/Tilt Sunroof Outer Skin,

  Courtesy of BMW OF NORTH AMERICA, INC.

Release 4 screws (1) in roof channel.

Fig 2: Identifying Roof Channel Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Open weld joints in area (1).

Fig 3: Identifying Open Weld Joints Area

Courtesy of BMW OF NORTH AMERICA, INC.

Release adhesive areas (layout, see next operation) and remove roof outer skin.

Installation: 

Fit new part on body. Fit windscreen for positioning.

Seal weld seams and screws with sealing compound.

Apply Adhesive  in areas (1).

Apply sealing compound in areas (2).

Fig 4: Identifying Adhesive And Sealing Compound Areas

Courtesy of BMW OF NORTH AMERICA, INC.