51 34 420 Removing and installing/replacing trim on window frame of rear door (front), left or right

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Detach rubber seal (1) and rubber guide (2) from trim.

Fig 1: Identifying Rubber Seal And Rubber Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Carefully detach trim (2) towards front/top.

Installation:

Fitted foam pieces must not be damaged when trim (2) is pushed in.

Fig 2: Identifying Trim And Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace faulty plastic nuts (1).

Fig 3: Identifying Plastic Nuts

Courtesy of BMW OF NORTH AMERICA, INC.