51 21 003 Replacing door detent (lock striker), front left or right

WARNING: This page is about a different variant/trim than selected.

Release screws (1) and remove door detent (2).

Installation:

If necessary, carry out basic adjustment by way of notches (3) on door detent (2).

Notches (3) must be vertical to B-pillar.

For tightening torque refer to 51 21 2AZ in 51 21 FRONT DOOR LOCKS .

Fig 1: Identifying Screws, Door Detent And Notches

Courtesy of BMW OF NORTH AMERICA, INC.