51 16 383 Removing and installing/replacing damper for glovebox

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Open glovebox.

Release clip (1).

Fig 1: Identifying Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Press catch (1) together and slide damper (2) in direction of arrow.

Remove damper (2) in inward direction.

Fig 2: Identifying Catch And Damper

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catch (1) and guide (2) on damper (3) must not be damaged or missing.

Fig 3: Identifying Catch, Guide And Damper

Courtesy of BMW OF NORTH AMERICA, INC.